DIY Tutorial - Polymer Clay Wine Bottle

This is the second bottle in the collection.
In this project I took detailed photo step by step on how to  upcycle this empty wine bottles.
There are so many ways you can reuse or upcycle empty wine bottle. It just takes a little time and imagination.
When I saw some empty bottles with different shapes and sizes in our workshop. I thought it will be nice to reuse it instead of taking them to bottle depot.  I always wanted to apply the techniques I have learned to each of these projects. My goal...  is to turn bare empty bottle to something unique and useful,  beautiful for home decors or even for gifts.

Purple Grapes

To begin here's the materials I used:

Clean Empty wine bottle of your choice

Clays - I used black, copper, silver, olive, purple & blue

Your basic tools for polymer clay

Rubber texture pad - I used Helen Breil's congo line

Pearl ex pigments - purple & white

Gilders paste - gold, german silver & bronze

First step: Condition the clay. 

I run each colours several times in the pasta machine

I wanted to have a greyish silvery look on my bottle so I combined silver and black for the cover.

Here's how I combined it. You can also use the proper 

way of blending colour but I have the habit of twisting it just to create a nice effect.

I run it a few times to the pasta machine using setting 5 or 6 to achieve the tone I like.

Once I'm happy with the blend of colour,  I cut a small piece to start creating my textured cover. 

I run that cut piece to the pasta machine at setting 4.

Then I layer it flat on top of my textured rubber sheet.  

This time, I will run it in pasta machine with the textured sheet. Place it to lower setting maybe on 3.

Tip: if you find that the clay sticks to your rubber sheet then spray a little water on your rubber sheet before running it to the machine.

Here's how it looks after running it into the pasta machine. I wanted to create a distress look so I tear the sides of the clay before placing it on the bottle.

Time to cover the bottle.

I wanted an uneven look so I vary the sizes of the textured clay.

When all sides were done then I work on the bottom. It's optional to do this part next. It can be done as the last step but I don't move my bottle often once I'm working and I wanted to see how it looks before going to more details.

I picked the copper colour for  the bottom and did the same technique above.

It's almost done. I covered the entire area where I wanted and now I'm going to create some more details at the top. This process may take longer.  It depends on what design you have in mind. I was thinking about grapes and vines for this bottle. It will make a lovely accent piece for a wine bar or beside a small wine rack. 

For the vines and leaves I used copper and olive together. 

Here's the colour I wanted to create but if you think you would like to leave it green or more darker. Just go ahead and play around with it.

For the grapes I chose this colour and combined it to get a purple colour.

I start sculpting the vines from the copper and olive clay. I twisted it around the bottle neck and all the way down and added some curly vines on the sides. I don't have any cutter for the leaves so I created my own using a small cutter tool.  I made two pieces, smoothen the edges and placed one on the top and one in the middle part. 

Then I made purple small balls and clustered them together to create the grapes. 

Then I added grapes down towards the covered part. It looks like it is hanging down.

I brushed a little purple pearl ex in the middle of the grapes and and white on the sides of the grapes to create a metallic look.

 I added some details, like lines on the vines and leaves to make it more realistic.

Picture shown below, the bottle is ready for curing.

I cured it at 275 for 45 minutes in the oven.

After curing, I let it cool down and applied the gilders paste on the  textured area. 

To apply the gilders paste, I just used my  point fingers to rub it on the surface. Small amount at a time. Just go over it and  add some other colours to create contrast and different tone. 

This is how it looks using german silver, some antique gold and some bronze. 

It gives it a vintage appearance.

I also rub a little bronze gilders and antique gold gilders paste on the leaves and vine.

I Rub excess of the gilders paste with cotton towel. It also creates a gilded appearance.

I let it dry and I finished it with PYM II or you preferred finishing. 

This was a fun project. It's a nice addition to my wine bottle collection. Project time 3 hours including curing.

Thank you for visiting my blog site.  

More Designs coming soon. 

First Bloom Polymer Clay Wine Bottle

My latest project.  This will be part Polymer clay wine bottle collection. I collected several sizes and shapes of empty wine bottles and I will be working on reusing those bottles to create something unique and beautiful. 

I am exciting about this new collection and I've been working on my designs, gathering some ideas and techniques.
This piece is lovely. Simple & Elegant.

In this project I used: 

Black, dark red, white and pink polymer clay

Textured rubber stamp sheet by Helen Breil

Glass bead to accent the flower

Bronze & Gold gilders paste

Red & pink pearl ex pigments for flower details

I was not able to take photos step by step while making this but I will do it on my other project.

This is a great way of reusing empty wine bottles. They make a nice decor or even a nice gift. 

First Bloom

New design coming soon.

Thank you visiting my blog site.

Frosted Vases With Sculpted Polymer Clay

I wanted to create something different and I decided to combine glass painting and polymer clay. These are my frosted vases with polymer clay design. 

To start with this project. I buy inexpensive, used glass vases from the thrift store.

I paint the clear glass with a sponge using 2 to 3 colours of frost enamel glass paint. 

This technique is easier than resurfacing the entire glass with polymer clay.  I leave the glass to dry after painting, maybe for an hour. Flowers, leaves and other details are sculpted individually and glued on the glass. I brushed them with pearl ex pigments to create a metallic look and highlight some details.  The good thing about using the enamel paint is, it can be cured in the oven same temperature with the clay. I finished these vases with PYM II. I tested it and it works fine with painted glass surface. 

I created about 4 designs of these frosted glasses.  I have more ideas and designs coming and I will share it with you soon. These vases belongs to my personal collections.

Roses are Red

Pretty Pink Daisy

I wanted to create an orchid flowers but I decided to make changes and accent 

it with pearl. It turned out beautiful. 

Thank you for visiting my blog site. 

Flower Garden Polymer Clay Vase

This is a brick textured polymer clay vase with sculpted flowers. For this project, I combined copper and sienna premo polymer clay & brick texture sheet by makins for the vase cover. I brushed it with gold pearl ex to create a metallic look.

Flowers were individually sculpted, brushed with different shades of pearl ex for the details and I used polybonder adhesive to secure it on the vase. 

It took me long to finish this project but it turned out very nice. 

This made a beautiful birthday gift to someone special. 

Here's another design using the same technique and colours. It is

an oven safe dish I found from the dollar store. 

I designed this dish to have a layered look cover just like the vase.

It's a beautiful piece to keep. This project is also a birthday gift to someone special.